Prev my images Prev

LYNX: BRIDGE SAW


THE LYNX IS A SAW DESIGNED AND BUILT FOR THE PERSON WHO NEEDS AN ACCURATE AND VERSATILE SAW AT AN AFFORDABLE PRICE.

Automatic & Manual

In the 'Automatic' mode, the operator can program up-to 9 lines of cuts each, with a maximum of 99 repetitions.

In the 'Manual' mode, the operator can position the blade to the first line of cut and choose to perform a blind or an End-to-End Cut. The operator can enter the transfer width for the next cut and hit the enter button on the PLC. The PLC positions the bridge to the required width at an accuracy of 0.1mm.

Pneumatic Head Tilt for Mitre Cuts

A simple flick of a flip switch charges a RAM that pushes the head outwards to tilt at 45 degree. A mechanical stop is provided that can be adjusted to suit the angle of tilt.

Laser Assistance

In both the the 'Automatic' or 'Manual' mode, the operator can line up the blade to the first cut using the 5mW laser liner that is aligned with the blade.

Blind Cuts

Two Sensor guides, one on either side of head can be slid into position to set the start and end of cuts for both Manual and Automatic operations.

Rotating Table

The table can be rotated to a full 360 degrees. The table can be locked into position at 0, 45, 90,135, 180,225,270,315 and 360 degrees. A pneumatic Ram can be actuated to lock the table at any angle.

Slab Loading

A high pressure hydraulic RAM attached the table frame tilts the table towards the front to a 80 degree angle to the ground. A simple selector flip switch is mounted to the side of the hanging pendant that starts the hydraulic pump. A manual lever attached to the pump can be actuated to lift or lower the table. 

The team at Farnese Australia understands that buying stone machinery is a big decision, one that can be extremely costly when breakdowns occur and equipment doesn't run to full capacity. That’s why we provide our customers with unparalleled service and support for all machines throughout Australia. From on-site installation and training to after-sales telephone and in-person support and repairs, our professional sales and service team will keep your valuable asset running.



FOOTPRINT





Technical Data

Metric  

Imperial  

Length

5375 mm

211.614 ''

Depth

4550 mm

179.1 ''

Height

2500 mm

98.4 "

Cross Travel Stroke

3820 mm

150.4 ''

Long Travel Stroke

3755 mm

148 ''

Up/Down Stroke

280 mm

11 ''

Table Dimensions

3220 mm x 2000 mm

127 '' x 79 ''

Blade Diameter

Recommended 400 mm 

(Max 550 mm)                           

Recommended 16" 

(Max 17")

Motor Shaft Diameter

60 mm

2.4 "

Motor Power Rating

9.2 KW (1440 RPM)

15 HP (1800 RPM)

Electrical Power Requirements

415/3/50 32A + Neutral

220/3/60 50A

Commissioning Time

3 to 5 Days

3 to 5 Days



Copyright © Farnese Australia 2016